Ultimate-speed Z31391 User Manual download pdf (Page 6)

6 GB/IE

Ensure that neither the fan nor the power

cable reach into the steering wheel or hinder

the operation of the pedals.

Mounting

Note: Adhere to the previously mentioned

safety notes before mounting the appliance.

Note: Using the suction cap

2

, you can ﬁt

the fan

1

to all smooth surfaces. You can opti-

mise the adhesion of the suction cup by cleaning

the surface where you want to ﬁt it in advance

with a suitable cleaner (for instance alcohol).

Press the suction cup ﬁrmly onto the surface

where you plan it to sit.

Ensure that the suction cup is in place ﬁrmly.

To remove the suction cup, press with a hard

object (such as a car key) from the side

against the suction cup and pull the suction

cup oﬀ.

Place the power cable in such a way that it

cannot hinder anyone while driving or when

getting in and out.

Operation

Use the ON / OFF switch

5

to switch the

fan

1

on or oﬀ.

Start the engine of the vehicle and plug the

12 V adapter into a correctly installed car

socket.

ATTENTION! Avoid plugging in and

switching on the fan before starting the

engine. Voltage ﬂuctuations caused by start-

ing the engine could damage the motor of

the fan.

Switch the fan oﬀ and unplug the 12 V

adapter from the socket, before you switch

the engine oﬀ, or leave the vehicle.

Troubleshooting

Should the fan

1

not work, although it is plugged

in correctly, checked the ﬁtted ﬁne fuse

8

of

the 12 V adapter

4

.

Turn the cap

6

of the 12 V adapter oﬀ in

an anticlockwise direction.

Remove the ﬁne fuse

8

and replace it with

a new one according to the speciﬁcations

in the “Technical Data”. Take care that you

ﬁt the contact pin

7

correctly after replac-

ing the ﬁne fuse.

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Comments to this Manuals

No comments