Ultimate-speed Z29511 User Manual download pdf (Page 13)

13 GB/MT

Introduction / Safety notes

Hydraulic car jack

Q

Introduction

These operating instructions form a

part of this product. Make yourself

familiar with all the operating instruc-

tions and safety advice for the product before

use. Use the product only as described and for

the indicated purpose. If you pass the product

on to anyone else, please ensure that you also

pass on all the documentation with it.

Q

Proper use

The hydraulic vehicle jack is intended for raising

and lowering motor vehicles. Other uses or

modiﬁcation of the hydraulic vehicle jack shall

be considered as improper use and may lead

to injury or damage. The manufacturer will not

accept liability for loss or damage arising from

improper use. The product is not intended for

commercial use.

Note: Reclose the release

5

valve after each

use!

Q

Description of parts

1

Lifting handle

2

Lifting arm

3

Support plate

4

Carrying handle

5

Release valve

6

Lifting handle socket

7

Cover

Q

Technical information

Stroke: 13.0 cm - 34.5 cm

Maximum load: 2000 kg

Q

Included items

1 Hydraulic car jack

1 Operating instructions

Safety notes

m DANGER! Follow the instructions below to

avoid the threat of loss of life, injury, or

damage to the product etc.

J Always use axle stands and wheel chocks

in addition to your hydraulic vehicle jack.

Never work under a raised vehicle unless

you have taken additional safety precau-

tions. This is intended to prevent the vehicle

from rolling away, sliding oﬀ or overturning

the jack.

J Use the product on a solid, level surface

only. Using the product on an unstable or

uneven surface – such as a gravel surface

– may lead to the load slipping.

J

2000

kg

Ensure that you never exceed the

allowable (rated) load capacity.

J The person operating the jack must observe

the jack and the load during all movements.

J Never work under the raised load if it has

not been made secure by suitable means.

J Do not allow the hydraulic vehicle jack to

be used by uninstructed or inexperienced

persons.

J Before using the hydraulic vehicle jack take

precautions to prevent the vehicle from roll-

ing away. Put the handbrake on, place the

vehicle in gear (with automatic gearboxes

set to “P”) and chock the wheels.

J Even with safety measures in place always

remain alert and make a visual check that

the support plate

3

is ﬁrmly seated

against the vehicle jacking point.

J Make sure that no petrol, battery acid or

any other dangerous substance can ﬂow

out of the vehicle when the vehicle is being

lifted.

J Check that no person or object is under the

vehicle before you lower it.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19

Comments to this Manuals

No comments